Makita DF010DSE specifications Repair, DC motor, Gear assembly, Disassembling

P 2/ 5

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. Remove the bit and the battery from the machine for safety before repair/ maintenance.

[1] NECESSARY REPAIRING TOOLS

Code No.	Description	Use for
1R362	Retaining ring pliers with long bent nails	Removing/ Installing Bit sleeve

[2] LUBRICATION

Apply Makita grease N No.2 to the following portions designated with the black triangle to protect parts and product from unusual abrasion.

Item No.	Description	Portion to lubricate	Amount
11 26	Motor housing R and L	Each hinge portion that contacts Lock washer	a little
Fig. 1			Makita grease N No.2
	11

Handle (R) Lock washer

26

Handle (L)

[3]DISASSEMBLY/ASSEMBLY

[3]-1. DC motor, Gear assembly

DISASSEMBLING			Fig. 2
			small slotted screwdriver
(1) Remove two Set plates from Handle set as follows:
			Handle set
Insert a small slotted screwdriver through the punched hole of set plate and move
Set plate in the direction of the arrow using the screwdriver while
pushing Set plate against Handle set. (Fig.2)
(2) Handle set can be removed from Motor housing by removing two Bind 3x14
tapping screws and one 4x25 tapping screw from Handle set. (Fig. 3)
(3) Separate Housing R and Housing L by removing three Bind 3x14 tapping screws
and two Bind PT3x8 tapping screws. (Fig. 4)
			Set plates (2pcs.)
Fig. 3		Fig. 4
Bind 3x14		Bind PT3x8 tapping	Bind 3x14 tapping screws (3pcs.)
tapping	4x25 tapping screw	screws (2pcs.)
screws (2pcs.)

Handle set