Harbor Freight Tools 92966 manual Assembly

Sewing Machine

Table Stand and

Top (not provided)

Power Switch	Motor	Knee Lifting Arm
		for Presser Foot

Assembly

The assembly instructions describe mounting the Single-Needle Sewing Machine (Model 92966) to the Table Stand (Model 03929), not included. In order to complete this procedure, you must first purchase and assemble the Table Stand Kit (Model 03929).

1.Locate four corner rests in the rectangular hole of the Table Stand where the machine will sit.

2.Place two rubber seats (A) on the operator-side and secure with supplied hardware (C). See figure 1.

3.Place two rubber hinge rests (B) on the hinge-side and secure with supplied hardware

(C).

4.Seat the Oil Pan (D) on the corner seats (A). See figure 2.

5.Insert Hinges (E) into the machine bed. See figure 3.

6.Fit the machine head’s hinges to the rubber hinge rests (B) before placing the machine head on the corner seats. See figure 4.

SKU 92966 For technical questions, please call 1-800-444-3353. Page