Harbor Freight Tools 92966 manual Attaching the Needle, Threading the Machine Head

Attaching the Needle

Replacement Needle Type: 135 X 17

1.Unplug the Power Cord from the electrical outlet.

2.Select a proper needle size according to the thread count and type of material being sewn.

3.Turn the Hand Wheel until the needle bar reaches the highest point of its stroke.

4.Loosen Screw (2) and hold Needle (1) with its indented part facing toward the Presser Bar (5-18).

5.Insert the needle and push it up until it will go no farther.

6.While holding in place, securely tighten Screw (2).

Threading the Machine Head

Set the thread spool on its holder and guide the thread through the machine as illustrated to the left. The numbers in the illustration indicate the threading sequence.

SKU 92966 For technical questions, please call 1-800-444-3353. Page 10