OPERATION77-
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released
To start the tool, simply pull the trigger. Tool speed is increased by increasing pres- sure on the trigger. Release the trigger to stop.
Switch trigger
Reversing switch action
CAUTION:
*Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool
This tool has a reversing switch to change |
| - |
the direction of rotation. Depress the | Reversing switch lever | |
reversing switch lever from the A side for |
|
|
clockwise rotation or from the B side for |
|
|
counterclockwise rotation. When the switch |
|
|
lever is in the neutral position, the switch |
|
|
trigger cannot be pulled. |
|
|
| Clockwise | Counterclockwise |
Speed change
To change the speed, first switch off the tool and then slide the speed change lever to the "11" side for high speed or "1" side for low speed. Be sure that the speed change lever is set to the correct position before operation. Use the right speed for your job.
0Low speed
a High speed
Speed change lever
10