Makita 6203DWAE instruction manual Additional Safety Rules For Charger & Battery Cartridge

Page 7

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C ( 5 O O F ) or ABOVE 4OoC (104OF).

2.Do not attempt t o use a step-up transformer, an engine generator or DC power receptacle.

3.Do not allow anything t o cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.

5.A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

(1) Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge t o water or rain.

6.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).

7.Do not incinerate the Battery Cartridge even i f it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

7

Image 7
Contents With Fast Charger SPECIFICAT10N SPersonal Safety Electrical SafetyWork Area Tool Use and Care ServiceSpecific Safety Rules Symbols Important Safety Instructions For Charger Battery Cartridge Additional Safety Rules For Charger & Battery Cartridge Charging Installing or removing driver bit or drill bit AssemblySpeed change Switch actionReversing switch action OPERATION77Screwdriving operation Adjusting the fastening torqueDrilling operation Replacing carbon brushes MaintenanceAccessories Cordless Driver Drill $FD Gear AssemblyRecycling the Battery