Keyless Chuck System

This cordless driver drill is now equipped with a”&&‘	Keyless Chuck
system.

This Keyless Chuck features a click locking mechanism to reduce loosening of the bit from vibration, in addition to making the bit faster and easier to install.

Below are the instructions for using the “New“keyless chuck. This sheet supersedes the “Installing or Removing Driver Bit or Drill Bit” section on Page 7 of the instruction manual.

Installing or removing driver bit or drill bit

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit.

Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. Chuck is locking when you hear a slight clicking sound.

To unlock and remove the bit, hold the ring and turn the sleeve counterclockwise.