Additional Safety Rules

FOR CHARGER AND TOOL

1.The Charger and the tool are specifically designed to work together. Do not attempt t o charge any other cordless tool with this Charger. Do not attempt t o charge the tool with any other charger.

2.Do not charge the tool when temperature is BELOW 10°C (50OF)or ABOVE 45OC (113OF).

3.Do not use charger in damp or wet locations.

4.Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.

5.Do not store the tool in locations where the temperature may reach or exceed 5OoC (122OF).

6.Do not incinerate the tool even if it is severely damaged or is completely worn out. The tool can explode in a fire.

7.Be aware that this tool is always in an operating condition, because it does not have t o be plugged into an electrical outlet.

8.Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

9.Hold the tool firmly.

I O . Keep hands away from rotating parts.

11. When drilling into walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!

Hold the tool only by the plastic handle or plastic tool body to prevent electric shock if you drill into a "live" wire.

12.Do not leave the tool running. Operate the tool only when hand-held.

13.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.