Makita 601DST instruction manual Maintenance

Page 12

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance.

Storage

Do not clean the tool, charger and/or battery with benzine, thinner or cleaningchemi- cals. Cracks and discoloration may be caused.

0 Do not store the tool, charger and/or battery in locations where the temperature may reach or exceed 40°C 14OOF).

To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

ACCESS0 RIES

CAUTION :

These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.

0 Charger

0 Battery 122

Model DC122

 

0 Extension cord

12

Image 12
Contents Battery-Powered Driver Drill Safety Instructions Page Important Safety Instructions For Battery & Charger Additional Safety Rules for Battery Additional Safety Rules for Charger Additional Safety Rules for Tool DC122 DC121 Approx hour Approx hours ADDrox hours Holes and tighten clockwise. Be sure to Band 19/64 Maintenance 10 mm 3/8 Page Recycling the battery