ADDITIONAL SAFETY RULES FOR TOOL
1.This tool is specifically designed t o drill in woods/metals or to drive wood screws. Do not use it for other purposes.
2.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
3.Always secure small workpieces in a vise or similar
4.Hold the tool firmly.
5.Keep hands away from rotating parts.
6.When drilling into walls, floors or wherever "live" electric wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock if you drill into a "live" wire.
7.Do not leave the tool running. Operate the tool only when
8.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.