Switch action
Move the reversing switch lever to the "FWD" position for colckwise rotation or the "REV" position for counterclockwise.
Tool speed is increased by increasing pres- sure on the tigger. To start the tool, simply pull the trigger. Release the trigger to stop. When the reversing switch lever i s in the neutral position, the tool will not start even if you pull the trigger.
CAUTION :
a Always check the direction of rotation before drilling.
*Use the reversing switch lever only when the tool comes to a complete stop. Changing the direction of rotation before the tool stops may ruin the tool.
a When not operating the tool, keep the reversingswitch lever in the neutral position.
7