Features, Assembly, Use | Black & Decker HP362, 90528103 instruction

Labels on tools

Warning! To reduce the risk of injury, the user must read the instruction manual.

Additional safety instructions for batteries and chargers

Batteries

Never attempt to open for any reason. Do not expose the battery to water. Do not expose the battery to heat.

Do not store in locations where the temperature may exceed 40 °C.

Charge only at ambient temperatures between 10 °C and 40 °C.

Charge only using the charger provided with the tool. When disposing of batteries, follow the instructions given in the section "Protecting the environment".

Chargers

Use your Black & Decker charger only to charge the battery with which it was supplied. Other batteries could burst, causing personal injury and damage.

Never attempt to charge non-rechargeable batteries. Have defective cords replaced immediately.

Do not expose the charger to water. Do not open the charger.

Do not probe the charger.

Features

1.Quick release collar

2.Speed selector switch

3.Torque adjust collar

4.Pivot lock release button

5.Battery release buttons (on battery)

6.Battery

7.On/off trigger switch

8.Forward/reverse and lock-off button

Assembly

Fitting and removing the battery (fig. A)

Warning! Make sure that the lock-off button (8) is engaged to prevent accidental switch actuation before removing or installing a battery.

To fit the battery (6), line it up with the receptacle on the tool. Slide the battery (6) into the receptacle and push until the battery (6) snaps into place.

To remove the battery (6), push the two release buttons

(5)simultaneously while at the same time pulling the battery (6) out of the receptacle.

Charging the battery (fig. C)

This battery is shipped in a partially charged state. Charge the battery before first use using the mains charger (9) for nine hours.

The battery (6) needs to be charged whenever it fails to produce sufficient power on jobs that were easily done before. When charging the battery (6) for the first time, or

+40ºC

+10ºC

The charger is intended for indoor use only.

Read the instruction manual before use.

Charge only at ambient temperatures between 10 °C and 40 °C.

after prolonged storage, it will only accept an 80% charge.

After several charge and discharge cycles, the battery (6) will attain full capacity. The battery (6) may become warm while charging; this is normal and does not indicate a problem.

After normal usage the battery (6) will be fully charged in approximately three to six hours.

Electrical safety

Your charger is double insulated; therefore no earth wire is required. Always check that the power

supply corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a regular mains plug.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

To prolong battery life, do not leave the battery on charge for extended periods of time (over 30 days without use). This can significantly reduce battery life.

Fitting the battery cap (fig. D)

Warning! Fit the cap (10) to the battery (6) for transportation and storage.

Use

Pivoting the tool head (fig. B)

The tool can be pivoted to three different positions (fig. B). To avoid being pinched at the points indicated by the arrows, hold the screwdriver at both ends and use your

HP362, 90528103 specifications

The Black & Decker 90528103, HP362 is an innovative and versatile tool designed to meet the needs of both DIY enthusiasts and professionals alike. This product is an excellent combination of performance, durability, and user-friendly features, making it a popular choice among those who value efficiency and reliability in their power tools.

One of the standout features of the HP362 is its powerful 6-amp motor, which provides ample strength for a variety of tasks. Whether you're drilling through wood, metal, or plastic, this tool offers the torque and speed required to complete projects effectively. The variable speed settings allow users to adjust the drilling speed according to the material, enabling precise control and ensuring a clean finish every time.

The design of the HP362 is ergonomic, with a comfortable grip that reduces fatigue during extended use. The lightweight construction makes it easy to maneuver, allowing users to reach tight spaces without straining. Additionally, the inclusion of a keyless chuck simplifies bit changes, promoting quick and efficient tool adjustments.

This model also comes equipped with a reverse function, which is invaluable for tasks that require removing screws or backing out drill bits. This reverse feature adds to the overall versatility of the tool, making it suitable for a wide range of applications, from assembling furniture to home repairs.

A significant technological advancement included in the Black & Decker 90528103 is its integrated LED work light. This feature enhances visibility in dark or confined areas, ensuring that users can maintain precision in their work, regardless of the lighting conditions.

Durability is another key characteristic, as this unit is built to withstand the rigors of daily use. Quality materials are used in the construction of the HP362, ensuring that it remains reliable over time.

In summary, the Black & Decker 90528103, HP362 combines power, durability, and advanced features in a user-friendly package. Whether tackling home improvement projects or professional tasks, this tool is designed to provide the performance and reliability that users have come to expect from one of the leading brands in the power tools market. With its ergonomic design, variable speed controls, and added technological enhancements, the HP362 stands out as a top choice for power tool enthusiasts.