Safety instructions, Electrical safety

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

1. Work area safety

a.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f.If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

NOTA: The term "Residual Curent Device (RCD)"

can be replaced by "Ground Fault Circuit Interrupter (GFCI)" or by "Earth Leakage Circuit Breaker (ELCB)".

ENGLISH

3. Personal safety

a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use personal protective equipment. Always wear eye, ear and respiratory protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energising power tools that have the switch on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

GC1800, GC1200, GC9600, GC1440 specifications

Black & Decker is known for its innovative and reliable power tools, and their range of cordless vacuum cleaners is no exception. Among their notable models are the GC1440, GC9600, GC1200, and GC1800, each designed to cater to different cleaning needs while incorporating advanced technologies and user-friendly features.

The Black & Decker GC1440 is an efficient cordless vacuum that emphasizes portability and ease of use. It features a lightweight design, making it ideal for quick clean-ups around the house. The vacuum comes equipped with a powerful lithium-ion battery that provides a longer runtime, allowing users to tackle messes without frequent recharges. Its 2-in-1 functionality—converting from a stick vacuum to a handheld model—adds to its versatility, making it suitable for various surfaces and areas, from carpets to hard floors.

Next, the GC9600 model offers a more advanced cleaning experience with its cyclonic action technology. This feature helps maintain strong suction power by separating dirt from the air, ensuring consistent performance over time. The vacuum also includes a large dust container that minimizes the need for frequent emptying, making it perfect for larger cleaning jobs. With an ergonomic handle and swivel steering, the GC9600 is user-friendly and maneuverable, allowing users to reach difficult spaces effortlessly.

The GC1200 stands out with its specialized attachments. This model offers a crevice tool, brush roll, and upholstery nozzle, enabling thorough cleaning of various surfaces, including furniture and corners. Its compact design allows for easy storage, while the anti-tangle technology minimizes hair clogging, making it an excellent choice for pet owners. Additionally, the vacuum’s washable filter ensures that maintenance is straightforward, prolonging its lifespan.

Finally, the GC1800 model elevates performance with its enhanced suction capabilities. This vacuum features smart sensing technology that adjusts the suction power based on the surface type, optimizing cleaning efficiency. It also comes with a large capacity battery that supports extended cleaning sessions without interruptions. The multi-surface cleaning head allows users to transition between floor types seamlessly, ensuring versatility in every cleaning situation.

In summary, Black & Decker’s GC1440, GC9600, GC1200, and GC1800 models exhibit an array of impressive features and technologies, tailored to meet the diverse needs of users. Whether you are looking for portability, advanced suction, special tools, or smart functionality, these vacuums offer reliable solutions to keep your home clean and fresh.