Black & Decker GC1800, GC9600, GC1200, GC1440 instruction manual Features, Assembly, Use

Page 15

Features

This tool includes some or all of the following features.

1.Variable speed switch or two-speed on/off switch

2.Forward/reverse slider

3.Mode selector / torque adjustment collar

4.Chuck

5.Battery

6.Battery release button

fig. C

7.Charger

8.Charger connector

9.Charger plug

10.Battery Cap

Assembly

Warning! Before assembly, remove the battery from the tool.

Fitting and removing the battery (fig. A)

To fit the battery (5), line it up with the receptacle on the tool. Slide the battery into the receptacle and push until the battery snaps into place.

To remove the battery, push the release button (6) while at the same time pulling the battery out of the receptacle.

Fitting the battery cap (fig. B)

Warning! Fit the cap (10) to the battery (5) for transportation and storage.

Fitting and removing a drill bit or screwdriver bit (fig. D)

Warning! First remove the battery from the tool.

This tool is fitted with a keyless chuck to allow for an easy exchange of bits.

Lock the tool by setting the forward/reverse slider (2) to the centre position.

Open the chuck by turning the front part (11) with one hand while holding the rear part (12) with the other.

Insert the bit shank (13) into the chuck.

Firmly tighten the chuck by turning the front part (11) with one hand while holding the rear part (12) with the other.

Removing and refitting the chuck (fig. E)

Open the chuck as far as possible.

Remove the chuck retaining screw by turning it clockwise using a screwdriver.

Tighten an Allen key (14) into the chuck and strike it with a hammer as shown.

Remove the Allen key.

Remove the chuck by turning it counterclockwise.

ENGLISH

To refit the chuck, screw it onto the spindle and secure it with the chuck retaining screw.

Use

Warning! Let the tool work at its own pace. Do not overload.

Charging the battery

The battery needs to be charged before first use and whenever it fails to produce sufficient power on jobs that were easily done before. When charging the battery for the first time, or after prolonged storage, it will only accept an 80% charge. After several charge and discharge cycles, the battery will attain full capacity. The battery may become warm while charging; this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures below 4 °C or above 40 °C. Recommended charging temperature: approx. 24 °C.

Charger with charger plug (fig. E)

To charge the battery, make sure that it is fitted on the tool.

Insert the charger plug (9) into the connector (8). Plug in the charger (7).

Switch on at the mains.

After normal use, a charging time of 3 hours will provide sufficient power for most applications. However, further charging for up to 6 hours could significantly increase the use time, depending on the battery and charging conditions.

Disconnect the tool from the charger.

Warning! Do not use the tool while it is connected to the charger.

Selecting the direction of rotation

For drilling and for tightening screws, use forward (clockwise) rotation. For loosening screws or removing a jammed drill bit, use reverse (counterclockwise) rotation.

To select forward rotation, push the forward/reverse slider

(2) to the left.

To select reverse rotation, push the forward/reverse slider to the right.

To lock the tool, set the forward/reverse slider into the centre position.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual DE Instrucciones Manual DE Instruções Page Seguridad personal Instrucciones de SeguridadUso y cuidado de herramientas eléctricas Servicio técnicoEtiquetas sobre la Herramienta Características MontajeUso Consejos para un uso óptimo MantenimientoSelección de la dirección de rotación Encendido y apagadoBaterías Protección del medio ambienteServicio Técnico Características TécnicasSegurança pessoal Instruções de SegurançaAdvertências Gerais de segurança para ferramentas elétricas Distrações podem fazer com que você perca o controleRótulos da ferramenta Montagem RecursosLigar e desligar ManutençãoSeleção da direção da rotação Seleção do modo operacional ou torque fig. FBateria A12E A14E Proteção ao meio ambienteServico Características Técnicas BateriasPersonal safety Safety instructionsGeneral power tool safety warnings Electrical safetyLabels on Tool ServiceFeatures AssemblyUse Hints for optimum use MaintenanceSelecting the operating mode or torque fig. F Switching on and off Protecting the environmentService Technical DataCharger
Related manuals
Manual 8 pages 4.13 Kb

GC1800, GC1200, GC9600, GC1440 specifications

Black & Decker is known for its innovative and reliable power tools, and their range of cordless vacuum cleaners is no exception. Among their notable models are the GC1440, GC9600, GC1200, and GC1800, each designed to cater to different cleaning needs while incorporating advanced technologies and user-friendly features.

The Black & Decker GC1440 is an efficient cordless vacuum that emphasizes portability and ease of use. It features a lightweight design, making it ideal for quick clean-ups around the house. The vacuum comes equipped with a powerful lithium-ion battery that provides a longer runtime, allowing users to tackle messes without frequent recharges. Its 2-in-1 functionality—converting from a stick vacuum to a handheld model—adds to its versatility, making it suitable for various surfaces and areas, from carpets to hard floors.

Next, the GC9600 model offers a more advanced cleaning experience with its cyclonic action technology. This feature helps maintain strong suction power by separating dirt from the air, ensuring consistent performance over time. The vacuum also includes a large dust container that minimizes the need for frequent emptying, making it perfect for larger cleaning jobs. With an ergonomic handle and swivel steering, the GC9600 is user-friendly and maneuverable, allowing users to reach difficult spaces effortlessly.

The GC1200 stands out with its specialized attachments. This model offers a crevice tool, brush roll, and upholstery nozzle, enabling thorough cleaning of various surfaces, including furniture and corners. Its compact design allows for easy storage, while the anti-tangle technology minimizes hair clogging, making it an excellent choice for pet owners. Additionally, the vacuum’s washable filter ensures that maintenance is straightforward, prolonging its lifespan.

Finally, the GC1800 model elevates performance with its enhanced suction capabilities. This vacuum features smart sensing technology that adjusts the suction power based on the surface type, optimizing cleaning efficiency. It also comes with a large capacity battery that supports extended cleaning sessions without interruptions. The multi-surface cleaning head allows users to transition between floor types seamlessly, ensuring versatility in every cleaning situation.

In summary, Black & Decker’s GC1440, GC9600, GC1200, and GC1800 models exhibit an array of impressive features and technologies, tailored to meet the diverse needs of users. Whether you are looking for portability, advanced suction, special tools, or smart functionality, these vacuums offer reliable solutions to keep your home clean and fresh.
Top Page Image Contents