Black & Decker CDC14GK2-XE, CDC18K2-XE, CDC18GK2-XE, CDC14K2-XE Functional Description

Page 4

90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 4

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

The label on your tool may include the following symbols.

V

volts

A

amperes

Hz

hertz

W

watts

min

minutes

......................

alternating

 

 

 

no

current

 

 

direct current

no load speed

 

 

 

..........................

Class II Construction

........................

earthing terminal

 

........................

safety alert symbol

.../min

revolutions or

 

 

 

 

reciprocations

 

 

 

 

per minute

FUNCTIONAL DESCRIPTION

1.

Variable speed switch

 

 

 

2.

Forward/reverse slider

4

 

 

3. Torque adjustment collar

3

1

2

4.

Chuck

 

 

 

5.

Battery

 

 

 

5

BATTERY CAP INFORMATION FIGURE A (Page 5)

Battery pack storage and carrying caps (1) are provided for use whenever the battery pack is out of the tool or charger. Remove cap before placing battery pack in charger or tool.

WARNING: Do not store or carry battery pack so that metal objects can contact exposed battery pack terminals. For example, do not place battery pack in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery pack terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery pack terminals are protected and well insulated from materials that could contact them and cause a short circuit.

4

Image 4
Contents 800-654-155 General Safety Rules Specific Safety Rules Functional Description 90504485 CDC9602,CDC1200 etc 6/19/06 1039 AM Safety Warnings and Instructions Charging Safety Warnings and Instructions Drills Charging the Battery Pack Figure BImportant Charging Notes Trigger Switch & Reversing Button Figure E Torque Control Figure FKeyless Chuck Figure G Screw DrivingTroubleshooting MaintenanceConditions Service InformationPurchasers Statutory Rights MT Wellington NEW Zealand