90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 9
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
| TROUBLESHOOTING |
Problem | Possible Cause |
• Unit will not start. | • Battery pack not installed properly. |
•Battery pack not charged.
•Battery pack will not charge. • Battery pack not inserted into charger.
•Charger not plugged in.
•Surrounding air temperature too hot or too cold.
Possible Solution
•Check battery pack installation.
•Check battery pack charging requirements.
•Insert battery pack into charger until red LED appears.
•Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.
•Check current at receptacle by plugging in a lamp or other appliance.
•Check to see if receptacle is connected to a light switch which turns power off when
you turn out the lights.
•Move charger and battery pack to a surrounding air temperature of above 40 degrees F (4,5°C) or below 105 degrees F (+40,5°C).
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
Accessories
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
9