Dynalink RTA210 Indicator lights, Reconfigure router after reset to factory default, Function

4

5

Indicator lights

There are four green indicats on the front panel of the router. All lights will come on indicating self-test in progress every time the router is switched on.

Indicator	Function	Description
PWR	Power	Off - No power.
		On - Power is on.
DIAG	Diagnosis	Off - Self-test OK.
		Blinking – Upgrade in progress.
		On - Self-test or upgrade failed.
LAN	Network Link	Off - Ethernet not present.
		Blinking – Data going through Ethernet port.
		On - Ethernet is present.
DSL	Link Status	Off - Handshaking/training in progress.
		Blinking - Data going through ADSL port.
		On - ADSL link is up.

Reconfigure router after reset to factory default

If it happens that the router has been reset to factory default, you must restore the New Zealand configuration to connect. Go to Configuration > WAN > ATM PVC > Setup ATM PVC: