ADSL Router Quick Set-up Guide
Default Configuration for New Zealand
| We have | ||
1 settings, please move on to Section 2 "Installing the Router". | |||
| Router IP address | 192.168.1.1 |
|
| Subnet mask | 255.255.255.0 |
|
| VPI | 0 | (do not change) |
| VCI | 100 | (do not change) |
| Encapsulation | PPPoA | (do not change) |
| Operating mode | G.dmt | (do not change) |
| NAT | enabled | (do not change) |
| WAN IP | dynamic |
|
| DHCP | off |
|
| DNS relay | off |
|
| Router configuration and management: |
| |
| User name | admin |
|
| Password | private |
|
| Telnet password | private |
|
| Users must not change VPI, VCI, Encapsulation and Operating Mode settings. | ||
2 | Advanced users who have other setup preferences should refer to the ADSL | ||
Router User Manual on the provided CDROM. |
| ||
Installing the Router |
| ||
IMPORTANT- Before you start |
|
| |
Make sure your computer has these installed: |
| ||
Network interface card (NIC) |
| ||
TCP/IP protocol.
Other than attaching to a host computer the router can be connected to an uplink port of a network hub. If the hub has no uplink port available, a
A web browser is required to enter your Internet account user name & password. Make sure your web browser is Internet Explorer 5.0/Netscape 6 or better. Install either Explorer 5.5 or Netscape 6 from the provided CDROM if your computer does not have a suitable browser.
Remember to obtain these from your ISP:
Login user name and password
Public IP address (only if you subscribe for static IP)
DNS server IP.
