is fully charged, unplug the Charger from the electrical outlet and remove the Battery Pack from the Adapter.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Secure loose work pieces using a vise or clamps (not included) to pre- vent movement while working.
3.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.
General Operating Instructions
NOTE: For additional information regarding the parts listed in the following pages, refer to the Parts List & Assembly Diagram.
Remove the Battery Pack (44)
from the tool and set the Direction Lever (38) to its center, locked, position before making any adjustments, changing accessories, or storing the tool.
Torque Control (6)
Chuck (2)
Trigger (61)
Direction
Lever (38)
Battery Pack 
(44)
1.In order to use the included screw- driver bits, you must first attach the
Bit Adapter (62) into the Chuck (2). With the Chuck pointing away from you, turn the Chuck counterclock- wise. Insert the shank of the Bit Adapter all the way into the Chuck. Turn the Chuck clockwise to lock the Bit Adapter in place.
2.The Chuck accepts up to 3/8” diam- eter bits. Insert the appropriate bit for your application and tighten the
Chuck firmly. Never insert one of the included Bits directly into the Chuck. A smaller gauge than 3/8” will not be firmly secured and may result in injury or property dam- age.
3.Secure the workpiece in place, using a vise or clamps (not included).
CAUTION: Never change Torque Set- ting while drill is still rotating, as this can damage the Drill/Driver.
SKU 98544 | For technical questions, please call | Page 11 |