Chicago Electric 47606 Specifications, Save This Manual, Safety Warnings and Precautions

Page 2

 

Specifications

 

 

Chuck Capacity

1 Inch

Power

120 V, 60 Hz, 1.13 HP, 850 Watts

Amperage

6.8 Peak Amps, 4.6 Working Amps

RPM

900

Blows per minute

3,200

Accessories: Break Point (Bull) Bit, Flat Head Chisel, Depth Rod, Lubricant,

Masonry Drill Bits (10mm, 9/16”, 7/8”), Extra Brushes, Blowmold Case

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.

6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

7.Use eye, face and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.

8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.

9.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if

SKU 47606

For technical questions, please call 1-800-444-3353.

REV 03d; 05k

Page

Page 1 Page 3
Image 2
Page 1 Page 3
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsRead all instructions before using this tool SpecificationsSafety Warnings and Precautions Save This ManualREV 07c Vibration Hazard UnpackingAssembly Inserting and removing bits Operation General maintenance Troubleshooting and MaintenanceProblem Cause Action Changing Carbon BrushesParts List Part DescriptionAssembly Drawing SKU For technical questions, please call Please Read the Following Carefully

47606 specifications

The Chicago Electric 47606 is a versatile and powerful tool designed for both amateur and professional woodworkers. This table saw stands out for its combination of performance, ease of use, and portability. It is well-suited for various cutting tasks, including ripping large boards and making intricate crosscuts, making it a valuable addition to any workshop.

One of the primary features of the Chicago Electric 47606 is its robust 15-amp motor which delivers an impressive 5000 RPM. This powerful motor allows for smooth and efficient cutting, ensuring that users can tackle even the most demanding projects with ease. The saw has a large table surface that measures 27 inches by 16 inches, providing ample space for handling large workpieces. This table is constructed from durable materials, ensuring stability and reducing vibration during operation.

Safety is a top priority in the design of the Chicago Electric 47606. It includes a blade guard that protects users from accidental contact with the blade while allowing for clear visibility of the cutting area. Additionally, it features a push stick and a miter gauge for improved safety and precision, further enhancing the user experience.

The adjustable cutting height and angle of the blade are significant highlights of this table saw. Users can quickly adjust the blade height for various cutting depths, and the bevel adjustment allows for angled cuts up to 45 degrees. This versatility enables woodworkers to perform a wide range of cuts, from straightforward rip cuts to more complex miter cuts.

Furthermore, the Chicago Electric 47606 is designed for ease of transport. It includes a foldable stand, which not only provides stability during use but also makes storage and transportation convenient. Whether taking it to a job site or storing it in a garage, this feature enhances the portability of the saw.

Another impressive aspect of this table saw is its affordability. It offers a high level of performance and function at a competitive price point, making it accessible to hobbyists and professionals alike. Whether you are a weekend DIY enthusiast or a seasoned craftsman, the Chicago Electric 47606 combines performance, safety, and convenience, making it an excellent investment for woodworking projects of all types.
Top Page Image Contents