Chicago Electric 47606 operating instructions Operation

Page 7

Operation

Note: Make sure unit is not plugged in.

Note: If you wish, you may attach a Dust Cap for overhead drilling applications. To do so, after you install a bit, before you tighten the Bit Sleeve, slide the Dust Cap over the bit and adjust the Drill Stop so that the curve on the end of the Drill Stop secures the Dust Cap. Tighten the Handle. See FIGURE 4.

FIGURE 4

Curved end of Drill Stop

Dust

Cap

Note: Do not plug in the Rotary Hammer until the bit is loaded, the

Drill Stop is set, and the Knob selection is complete ( See Below).

1.Following the method on page 4, number 3, under assembly, adjust the Drill Stop to the desired length.

Note: The Drill Stop will only work when the Handle is on either side or the top of the Rotary Hammer. The body of the Hammer will interfere with the Drill Stop if the Handle is positioned on the bottom of the Hammer.

Warning: When setting the Knob, the Rotary Hammer must be switched off and be unplugged. Attempting to change the Knob setting while the motor is engaged will result in abrupt bit rotation and can cause serious personal injury and/or property damage. See setting the Knob below.

2.Set the Knob to either hammer/drill or hammer. See FIGURE 3 on page 5.

Hammer Setting: To hammer, turn the Knob so the “T” setting is lined up with the mark on the housing.

Hammer/Drilling: To hammer/drill, set the Knob so the “IT” setting is lined up with the mark on the housing.

Note: When setting the Knob make sure it positively clicks into the desired position. If Knob does not click into place, it could slip out of position resulting in unexpected tool performance.

3. Install the desired bit or chisel. Only when hammer/drilling use the Drill Stop.

4. If hammer/drilling, make sure the Drill Stop and Dust Cap, if needed, are installed properly.

5. The Handle should be rotated to the proper position for the application.

6. While keeping you finger off of the Switch, plug in the unit.

7. When you are ready to begin, make sure you have a firm grip on both the Main Handle and the Handle. Always operate the Rotary Hammer with both hands, holding it securely. The Rotary Hammer puts out extreme torque and will kick back and act with great force.

8. Turn on the Switch and allow the Rotary Hammer to run without a load for approximately one minute as the unit self-lubricates. Release the Switch, stopping the Hammer. Position the chisel or bit on the workpiece and start the Hammer again.

9. After using the Rotary Hammer, release the Switch to turn off the unit.

REV 03d, 07c

SKU 47606

For technical questions, please call 1-800-444-3353.

Page

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callSave This Manual SpecificationsSafety Warnings and Precautions Read all instructions before using this toolREV 07c Unpacking Vibration HazardAssembly Inserting and removing bits Operation Changing Carbon Brushes Troubleshooting and MaintenanceProblem Cause Action General maintenancePart Description Parts ListAssembly Drawing Please Read the Following Carefully SKU For technical questions, please call

47606 specifications

The Chicago Electric 47606 is a versatile and powerful tool designed for both amateur and professional woodworkers. This table saw stands out for its combination of performance, ease of use, and portability. It is well-suited for various cutting tasks, including ripping large boards and making intricate crosscuts, making it a valuable addition to any workshop.

One of the primary features of the Chicago Electric 47606 is its robust 15-amp motor which delivers an impressive 5000 RPM. This powerful motor allows for smooth and efficient cutting, ensuring that users can tackle even the most demanding projects with ease. The saw has a large table surface that measures 27 inches by 16 inches, providing ample space for handling large workpieces. This table is constructed from durable materials, ensuring stability and reducing vibration during operation.

Safety is a top priority in the design of the Chicago Electric 47606. It includes a blade guard that protects users from accidental contact with the blade while allowing for clear visibility of the cutting area. Additionally, it features a push stick and a miter gauge for improved safety and precision, further enhancing the user experience.

The adjustable cutting height and angle of the blade are significant highlights of this table saw. Users can quickly adjust the blade height for various cutting depths, and the bevel adjustment allows for angled cuts up to 45 degrees. This versatility enables woodworkers to perform a wide range of cuts, from straightforward rip cuts to more complex miter cuts.

Furthermore, the Chicago Electric 47606 is designed for ease of transport. It includes a foldable stand, which not only provides stability during use but also makes storage and transportation convenient. Whether taking it to a job site or storing it in a garage, this feature enhances the portability of the saw.

Another impressive aspect of this table saw is its affordability. It offers a high level of performance and function at a competitive price point, making it accessible to hobbyists and professionals alike. Whether you are a weekend DIY enthusiast or a seasoned craftsman, the Chicago Electric 47606 combines performance, safety, and convenience, making it an excellent investment for woodworking projects of all types.
Top Page Image Contents