Chicago Electric 92956 operating instructions Electrical Safety

Page 3

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite flammables.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

ELECTRICAL SAFETY

4.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

5.Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician to install a polarized outlet. Do not

change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

6.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

8.Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

9.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock.

SKU 92956

For technical questions please call 1-800-444-3353

PAGE 3

Image 3
Contents Close Quarter Drill For technical questions or replacement parts, please callWork Area Product SpecificationsGeneral Safety Rules Save this ManualElectrical Safety SKU For technical questions please call Specific Safety Rules ServiceIndustrial applications must follow Osha requirements GroundingFigure a Double Insulated Tools Tools with TWO Prong Plugs Grounded Tools Tools with Three Prong PlugsExtension Cords See Figure C, nextSee Figure C Figure C SymbologyUnpacking Product FeaturesOperating Instructions See Figure DHold the Drill firmly with both hands INSPECTION, MAINTENANCE, and Cleaning Unplug the Drill from its electrical outletDo not use damaged equipment Please Read the Following Carefully Parts ListAssembly Diagram