Chicago Electric 92956 operating instructions Symbology, Figure C

Page 9

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120 VOLT)

NAMEPLATEEXTENSION CORD LENGTH AMPERES

(At Full Load)

	25	50	75	100	150
	FEET	FEET	FEET	FEET	FEET
0-2.0	18	18	18	18	16
2.1-3.4	18	18	18	16	14
3.5-5.0	18	18	16	14	12
5.1-7.0	18	16	14	12	12
7.1-12.0	18	14	12	10	-
12.1-16.0	14	12	10	-	-
16.1-20.0	12	10	-	-	-

*Based on limiting the line voltage drop to five volts at 150% of the rated amperes.

FIGURE C

SYMBOLOGY

	Double Insulated
	Underwriters
	Laboratories, Inc.
	Canadian Standards
	Association
V ~	Volts Alternating
V ~	Current
A	Amperes
	Amperes
no	No Load Revolutions
xxxx/min.	Per Minute (RPM)

FIGURE D

SKU 92956

For technical questions please call 1-800-444-3353

PAGE 9

Image 9

Contents Close Quarter Drill For technical questions or replacement parts, please callGeneral Safety Rules Product SpecificationsSave this Manual Work AreaElectrical Safety SKU For technical questions please call Specific Safety Rules Service Industrial applications must follow Osha requirements GroundingFigure a Double Insulated Tools Tools with TWO Prong Plugs Grounded Tools Tools with Three Prong PlugsExtension Cords See Figure C, nextSee Figure C Figure C SymbologyUnpacking Product FeaturesOperating Instructions See Figure DHold the Drill firmly with both hands INSPECTION, MAINTENANCE, and Cleaning Unplug the Drill from its electrical outletDo not use damaged equipment Please Read the Following Carefully Parts ListAssembly Diagram