Some of the following symbols may be used on this tool. Please study them end learntheir meaning. Proper interpreta- tion of these symbolswfl[allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
V | Volts | Voltage |
A | Amperss | Current |
Hz | Her_. | Frequency (cycles per second) |
W | Watt | Power |
min | Minutes | Time |
| AlterrmtingCurrent | Type of current |
Direct Current | "[ypeor a characteristicof current | |
no | No Load Speed | Rotationalspeed, at no load |
[] | Class I! Construction | |
..Jmin | Per Minute | Revolutions,strokes, surface speed, orbits eta., per mince |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Read The Operator'sManual | operator'smanual before using this product. |
|
| To reduce the risk of Injury, user must read and understand |
| Eye Protection | wear safety gogg(es or safety glasses with side shields, |
|
| Alwaysor full face shield when operating this product. |
_IL | Safety Alert | Precautionsthat invotveyour safety. |
_) | No Hands Symbol | serious personal injury. |
| Fal_umto keep your handsawsy from the | |
_) | No Hands Symbol | Failure to keep your hands away from the blade will result in |
|
| serious personal injury. |
_) | No Hands Symbol | Failure to keep your hands away from the blade will result in |
|
| serious personal injury. |
| No Hands Symbol | Failureto keep your hands away from the blade will resultin |
|
| serious personaJinjury. |
(_) | Hot Surface | To reduce the dsk of injuryor damage, avoid oontactwith |
|
| any hot surface. |
6