TWO=SPEED Gear Train, Geartrainhi-Lold, Bit

TWO=SPEED GEAR TRAIN

See Figure 6.

The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed.

When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill in the Hi (2) speed range, speed will increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and Hi (2) speed for fast drilling or driving applications.

TWO SPEED

GEARTRAIN(HI-LO)LD

SPEED

Fig. 6

ADJUSTABLE TORQUE CLUTCH

This product is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using.

ADJUSTING TORQUE

See Figure 7.

[] There are twenty-four torque indicator settings located on the front of the drill.

[] Rotate the adjusting ring to the desired setting.

• 1-4	For driving		small screws
5-8	For	driving	screws	into	soft	material
9-12	For	driving	screws	into	soft	and hard

materials

®13-16For driving screws into hard wood

®17 -23For driving large screws

®For heavy drilling

TO DECREASE	ADJUSTING
TORQUE	RiNG

TO INCREASE

TORQUE

Fig. 7

BIT STORAGE

See Figure 8.

When not in use, bits provided with the drill can be placed in the storage area located on the base of the drill.

SCREWDRIVER

BIT

BiTSTORAGEAREA

Fig. 8