SWITCH
See Figure 8.
To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.
SB..BC_R
SWITCH LOCK
See Figure 10.
The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
c_ln_l:_6nlON (LOCI<)
REVm
(LOCI<)
9NITCH
1RGGi_
Fig. 8
VARIABLE SPEED
This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal part of the switch function.
TWO SPEED GEAR TRAIN
See Figure 9.
Your drill has a
"IWOSPB_LO
GF._'m(reN.O)
Fig. 9
Fig. 10
_h WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked
when not in use or carrying at your side.
REVERSIBLE
See Figure 10.
This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
,_ CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before changing
the direction of rotation or the two speed gear train
To stop, release switch trigger and allow the chuck to come to a complete stop.
11