KEYLESS CHUCK
See Figure 11.
A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Arrows on the chuck indicate which direction to rotate the chuck sleeve in order to LOCK (tighten) or UNLOCK (release) the chuck jaws. Loosen the chuck sleeve by rotating it counterclockwise with one hand. Insert drill bit into the chuck the full length of the jaws, tighten securely by rotating the chuck sleeve in clockwise direction.
DRU.BIT
Fig. 11
,_ WARNING: Do not hold chuck sleeve with one hand and use power of the drill to tighten chuck jaws
on drill bit. Chuck sleeve could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury.
ADJUSTABLE TORQUE CLUTCH
Your drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using.
TO ADJUST TORQUE
•identify the twenty four torque indicator settings located on the front of your drill. See Figure 12.
•Rotate adjusting ring to the desired setting.
1- 4 For driving small screws.
•5 - 8 For driving screws into soft material.
•9 - 12 For driving screws into soft and hard materials.
•13 - 16 For driving screws in hard wood.
•17 - 20 For driving large screws.
•21
Fig. 12
Note: Remember the
BIT STORAGE
See Figure 13.
When not in use, bits provided with your drill can be placed in the storage area located on the top of your drill as shown in Figure 13.
BTSTORAGEN]EA
Fig 13
12