,_k WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
_ WARNING: Do net at any time let brake fluids, gasoline,
oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
Only the parts shown en parts list, page 15, are intended to be repaired or replaced by the customer. All other parts should be replaced by a qualified service technician at an authorized service facility.
_i WARNING: Do not attempt to modify this tool or create accessories not recommended for use
with this tool. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
Do not abuse power tools. Abusive practices can damage tool as well as workpiece.
BATTERIES
Your drill'sbattery pack is equipped with 8 nickel- cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.
To preserve natural resources, please recycle or dispose of properly.
This product contains nickel- cadmium batteries. Local, state or federal laws may prohibit disposal of
Consult your local waste authority for information regarding available recycling and/or disposal options.
To obtain the longest possible battery life, we suggest the following:
•Store and charge your batteries in a cool area. Temperatures above normal room temperature will shorten battery life.
•Never store batteries in a discharged condition. Recharge them immediately after they are discharged.
•All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every
month or two. This practice will prolong battery life.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
,_ WARNING: Upon removal, cover the battery pack'sterminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel- cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
13