Specifications | Craftsman 973.11077 specification

•	Warranty			2
•	Introduction and Product Specifications			2
•	Rules For Safe	Operation		3-5
	A. Important	Safety Rules For Battery Tools		4
	B. Important	Safety Instructions For Charger		4
	C. Important	Information	For Recharging Hot Batteries	5
•	Accessories			6
•	Features			6
•	Operation			7-12
•	Maintenance			13
•	Battery Pack Removal and		Preparation For Recycling	13
•	Exploded View and Repair Parts List			15
•	Parts Ordering	/Service		16

FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. DRILL-DRIVER

If this CRRFTSMRN3/8 in. Drill-Driver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge.

If this CRAFTSMAN3/8 in. Drill-Driver is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

Your drill-driver has many features for making drilling operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this drill-driver making it easy to maintain and operate.

CAUTION: Carefully read through this entire owner's manual before using your new drill-

driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service.

SPECIFICATIONS:
Chuck Capacity		3/8 in.
Motor		9.6 Volt DC
Charger Rating	120 Volts, 60	Hz, AC Only
No Load Speed		0 - 600 RPM
Switch	Variable Speed	/ Reversible
Charge Rate		5 Hours
Clutch		6 Position
Maximum Torque		100 in. Ibs.

SPECIFICATIONS: