TWO-SPEED Gear Train, Battery Latches | Craftsman 315.11461 manual

SWITCH

See Figure 2.

To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.

FORWARD/REVERSE

SELECTOR

VARIABLESPEED
SWITCHTRIGGER	Fig. 2
VARIABLE SPEED

This toot has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.

Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal

part of the switch function.

TWO-SPEED GEAR TRAIN

See Figure 3.

Your drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill in the HI (2) speed range, speed will increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and HI (2) speed for fast drilling or driving applications.

TWO SPEEDLO

GEARTRAIN(HI-LO)SPEED

SPEED

Fig. 3

TO INSTALL BATTERY PACK

•Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 5.

•Place battery pack in your drill. Align raised rib on battery pack with groove inside drill. See Figure 4.

BATTERY

LATCHES

_DEPRESSLATCHESTO

RELEASEBATTERYPACK

Fig. 4

•Make sure the latches on each side of your battery pack snap in place and battery pack is secured in drill before beginning operation.

_	CAUTION: When	placing battery pack in your drill,
	be sure raised rib on battery pack aligns with groove
	inside drill and latches snap into place properly.
	Improper assembly of battery pack can cause
	damage to internal	components.

TO REMOVE BATTERY PACK