Craftsman 315.11461 operating instructions

Page 2

Warranty

.........................................................................................................................................................................

2

Introduction

3

General

Safety

Rules

3-4

Specific

Safety

Rules

4

Important Safety Instructions for Charger

5

Symbols

..........................................................................................................................................................................

6

Product

Specifications

7

Features

.....................................................................................................................................................................

7-8

Operation

9-14

Maintenance

15

Accessories

15

Exploded View And Repair Parts List

17

Parts Ordering

/ Service

18

FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. CORDLESS DRILL-DRIVER

If this CRnFTSMRN 3/8 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

If this CRRF'tSMRN3/8 in. Cordless Drill-Driver is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 66179

_,

Look for this symbol to point out important safety precautions.

It means attention!!! Your safety is

 

involved.

 

,_ WARNING:

O The operation of any power toot can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power toot operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores. Always wear eye protection which is marked to comply with ANSI Z87.1.

2

Image 2
Contents OperatorsManual Page Model Battery Pack Charger Do not charge battery tool in a damp or wet loca Shock, fire and/or serious personal injury Symbol Name DESIGNATION/EXPLANATION Battery Pack SwitchSwitch Lock DRILL-DRIVERBATTERYPAq Charging Battery Pack Important Information for Recharging HOT BatteriesReleasebatterypack TWO Speedlo GEARTRAINHI-LOSPEED To Install Battery PackBattery Latches To Remove Battery PackDrillbit Unlockchuck Keyless ChuckSelectorwithrevers Centerlockposition ForwardDrillbit Chuckjaws Lock Chuck To Adjust TorqueTo Decrease Torqueadjusting Ring Toincrease RightStoragearea BIT StorageScrewdriver BIT Drilling Mallet To Retighten a Loose Chuck Chuck RemovalMallet Chuckjaws Battery Pack Removal and Preparation for Recycling BatteriesPage Parts List See Back page for Parts Ordering InstructionsMY-HOME