E N G L I S H
•Insert the appropriate screwdriver bit.
When driving slotted head screws always use bits with a finder sleeve.
•Gently press the variable speed switch (1) to prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal.
•When the screw is flush with the workpiece, release the variable speed switch to prevent the screw head from penetrating into the workpiece.
D25113K/D25114K/D25213K - Chipping and chiselling (fig. A)
•Set the mode selector switch (4) to the “hammering only” position.
•Insert the appropriate chisel and rotate it by hand to lock it into one of 51 positions.
•Adjust the side handle (9) as required.
•Switch on the tool and start working.
•Always switch off the tool when work is finished and before unplugging.
•Do not use this tool to mix or pump easily combustible or explosive fluids (benzine, alcohol, etc.).
•Do not mix or stir inflammable liquids labelled accordingly.
Various types of
Consult your dealer for further information on the appropriate accessories.
Maintenance
Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
•This machine is not
•The tool will automatically switch off when the carbon brushes are worn.
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be regularly lubricated around the
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair agent where it will be disposed of in an environmentally safe way.
12