E N G L I S H
The tool will do the job better and safer at the rate for which it was intended. Do not force the tool. Warning! The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury.
14Check for damaged parts
Before use, carefully check the tool and mains cable for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the tool will operate properly and perform its intended function. Do not use the tool if any part is damaged or defective. Do not use the tool if the switch does not turn it on and off. Have any damaged or defective parts replaced by an authorised DEWALT repair agent. Never attempt any repairs yourself.
15Unplug tool
Switch off and wait for the tool to come to a complete standstill before leaving it unattended. Unplug the tool when not in use, before changing any parts of the tools, accessories or attachments and before servicing.
16Avoid unintentional starting
Do not carry the tool with a finger on the switch. Be sure that the tool is switched off before plugging in.
17Do not abuse cord
Never carry the tool by its cord. Never pull the cord to disconnect from the socket. Keep the cord away from heat, oil and sharp edges.
18Store idle tools
When not in use, tools must be stored in a dry place and locked up securely, out of reach of children.
19Maintain tools with care
Keep the tools in good condition and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep all handles and switches dry, clean and free from oil and grease.
20Repairs
This tool is in accordance with the relevant safety regulations. Have your tool repaired by an authorised DEWALT repair agent. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user.
Package contents
The package contains:
1Heavy duty rotary hammer drill
1Side handle
1Depth adjustment rod
1Kitbox
1Keyless chuck (D25114K)
1Instruction manual
1Exploded drawing
•Check for damage to the tool, parts or accessories which may have occurred during transport.
•Take the time to thoroughly read and understand this manual prior to operation.
Your heavy duty rotary hammer drill D25112(K)/ D25113K/D25114K/D25213K has been designed for professional rotary and hammer drilling, screwdriving and light chipping, chiselling, demolition applications and for carbide tipped core drilling.
1Variable speed switch
2
(D25112(K)/D25113K/D25114K)
3 Forward/reverse slider
4 Mode selector
5 Safety lock
6 Tool holder
7 Dust cover
8 Locking collar (D25114K)
9 Depth adjustment rod
10 Side handle
11 Depth stop clamp
Torque limiting clutch
All rotary hammer drills are equipped with a torque limiting clutch that reduces the maximum torque reaction transmitted to the operator in case of jamming of a drill bit. This feature also prevents the gearing and electric motor from stalling. The torque limiting clutch has been
Electrical safety
The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
8