Nintendo WUPSWAAB manual Recommended Play Environment, Using the Wii Remote Jacket

Sensor Bar Placement Guidelines

Center the sensor bar with the

TV screen, facing straight ahead.

• Do not place the sensor bar over air vents on the TV.

Using	Place the sensor bar to slightly
Wii	overhang the front surface of
Remote	the TV screen.
Controllers	Place the sensor bar on the
	same surface as the TV.

Recommended Play Environment

For the best results when using the Wii Remote controller:

•The front of the sensor bar should be directly in front

of you and clearly visible

•Avoid blocking the signal between the remote and the console or sensor bar

•Sit (or stand) directly in front of the TV, between 3 and 10 feet (1-3m) away

•Avoid bright light sources behind or near the TV

If the Wii Remote is not operating properly, see Wii

Remote and Sensor Bar in System Settings on the Wii U

Menu to make adjustments, or review “Wii Remote

Controllers” in Troubleshooting (p. 53).

Using the Wii Remote Jacket

•Be sure that the Wii Remote Jacket is installed prior to gameplay to reduce the risk of harm to the remote, surrounding objects, or people.

It might be necessary to remove the Wii Remote Jacket - for example, to replace the batteries in the Wii Remote controller. If you do remove the Wii Remote Jacket, be sure to put it back on before further play.

Installing Batteries in the Wii Remote

Pull the jacket from the base of the controller and pull the wrist strap out.

Pull the jacket up to expose the entire battery cover and remove the cover.

Insert the batteries, negative (–) end first.When removing batteries, remove the positive (+) end first.

Replace the battery cover and pull the wrist strap back through the hole in the bottom of the jacket. Pull the jacket back over the base of the controller.

Using Wii Remote Controllers

26 27