Setup
3. Setup
AC Power
AC Plug
Fuse Replacement
The
Make sure that you are connecting this product to the proper voltage, as per the specifications in this manual or on the product’s sticker.
Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
To determine the power requirements for the
The listed current rating indicates the maximum current draw during normal operation. For more information, you may download the document Sizing the Circuit Breakers from the CHAUVET® website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The
Connection | Wire (US) | Wire (Europe) | Screw Color |
AC Live | Black | Brown | Yellow or Brass |
AC Neutral | White | Blue | Silver |
AC Ground | Green/Yellow | Green/Yellow | Green |
This product uses a T 5 A, 250 V fuse.
Make sure to disconnect the product’s power cord before replacing a blown fuse, and always replace with a fuse of the same type and rating.
1.Disconnect the product from the power outlet.
2.Wedge the tip of a flat head screwdriver into the slot of the fuse holder.
3.Pry the safety cap out of the housing to pull out the installed fuse.
4.Remove the blown fuse from the safety cap and replace with a fuse of the exact same type and rating (T5 A, 250 V).
5.Insert the fuse holder back in place and reconnect power.
Installed fuse 
(held by plastic clip)
Safety cap
Spare fuse (inside safety cap) 