Operation
4. Operation
Control Panel Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the current function
Navigates upward through the menu list and increases the numeric value when in a function
Navigates downward through the menu list and decreases the numeric value when in a function
Control Options
Programming
You can set the
Refer to the Menu Map to learn about the menu options. The Menu Map has a Menu Level and a variety of programming levels for each option.
To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.
To select an option or value within the current programming level, press <UP> or <DOWN> until the option shows on the display. Press <ENTER> to select. In this case, if there is another programming level, you will see that first option or you will see the selected value.
To exit to the previous menu level, press <MENU>.
In the EDIT menu, <UP> and <DOWN> will only change the value of the current option. To change to the next option, press <ENTER>.
1. | Select DMX operation. | |||
|
| a) Go to MENU > INTRO > RUN. | ||
|
| b) Select DMX 512. | ||
2. | Select a DMX mode. | |||
DMX Operation | a) Go to MENU > INTRO > PERSON. | |||
|
| b) Select BASIC or ADVANCED. | ||
3. | Select the starting address. | |||
|
| a) Go to MENU > INTRO > ADDRESS. | ||
|
| b) Select a starting address, 001~496 (Advanced) or 001~500 (Basic). | ||
| The highest possible starting address for each DMX mode is as follows: | |||
|
|
|
| |
| DMX Mode | DMX Address |
| |
|
| Basic | 500 |
|
|
| Advanced | 496 |
|