Moxa Technologies warranty Overview, Installing the UC-7122/7124, Package Checklist

UC-7122

12 to 48 VDC

Ethernet x 2 (10/100BaseTx)

LED Indicators

The following LED indicators are located on the top panel of the UC-7122/7124.

UC-7122/7124

Quick Installation Guide

First Edition, July 2007

1. Overview

The UC-7122/7124 Series of mini size RISC-based ready-to-run embedded computers come with the WinCE operating system pre-installed. The embedded computers have dual 10/100 Mbps Ethernet ports and 2 or 4 RS-232/422/485 serial ports in an ARM9 box. In addition, the UC-7122 and UC-7124 have an internal SD socket and

RESET	LAN1	LAN2
12-48V
Ready
TX			RS-232
P1
RX			Console Terminal
UC-7112
		Socket Inside
RS-232/422/485		P2	Internal SD Slot for
P1			Storage Expansion

LED Name LED Color

Ready	Green
	Off
SD	Green
	Off
TxD	Green
P1-P4	Off
RxD	Yellow
P1-P4	Off

LED Function

Power is on and functioning normally Power is off or power error exists SD card is detected

No SD card is detected

Serial ports P1-P4 transmitting data Serial ports P1-P4 not transmitting data Serial ports P1-P4 receiving data Serial ports P1-P4 not receiving data

one USB 2.0 host port for storage expansion, to provide high performance communication and unlimited storage in a super compact, palm-size box. The UC-7122 and UC-7124 are the right solutions for embedded applications that use a lot of memory, but that must be housed in a small physical space without sacrificing performance.

	(remove cover to access)
Serial Port 1	Serial Port 2
(RS-232/422/485)	(RS-232/422/485)

4. Installing the UC-7122/7124

Wall or Cabinet Mounting

The UC-7122/7124 have built-in “ears” for attaching the embedded computers to a wall or the inside of a

6.0 mm

2. Package Checklist

Before installing the UC-7122/7124, verify that the package contains the following items:

y 1 UC-7122 or UC-7124
y UC-7122/7124 Quick Installation Guide
y	Document & Software CD
y	Cross-over Ethernet cable: RJ45 to RJ45, 100 cm

UC-7124

12 to 48 VDC

RESET	LAN1	LAN2
12-48V
Ready
TX
P1

Ethernet x 2 (10/100BaseTx)

RS-232

cabinet. We suggest using two screws per ear to attach the UC-7122/7124 to a wall or cabinet. The heads of the screws should be less than 6.0 mm in diameter, and the shafts should be less than 3.5 mm in diameter, as shown by the figure at the right.

DIN-Rail Mounting

3.5 mm

y CBL-4PINDB9F-100 console port cable:
	4-pin header to female DB9 cable, 100 cm
y	Universal Power Adaptor
y	Product Warranty Statement

Optional Accessories

yDK-35A DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are missing or damaged.

RX
		UC-7112
			Socket Inside
		RS-232/422/485
	P1		P2

Console Terminal

Internal SD Slot for Storage Expansion (remove cover to access)

DIN-rail attachments can be purchased separately to attach the product to a DIN-rail.

V+	LAN1	LAN2
12-48V
Ready
SD	Universal Communicator
TX

3. UC-7122/7124 Panel Layout

The UC-7122/7124 come with 2 or 4 software selectable RS-232/422/485 serial ports, one RS-232 console port, two 10/100 Mbps LAN ports, one internal SD slot, and one USB 2.0 host port. The following figures show the panel layouts of the UC-7122/7124.

P/N: 1802071220000

— 1 —

Serial Ports 1 to 4 (RS-232/422/485)

— 2 —

P1	P3
		RX
P2		TX
	P4
		RX	RS-232/422/485
		P1	P2	P3	P4

— 3 —