Pyramat S1000 manual Set-Up, Connection Methods, Video Game Console Connection

SET-UP

CAUTION: Keep fingers clear of the folding seam when folding or unfolding the rocker.

1Unfold the top portion of the Sound Rocker until the backrest is flush with the seat portion.

4 Twist the volume knob to click on the power.

2Place the Sound Rocker so

that the control panel is less than 11 ft./3.5 meters from the power

source.

5Check the control panel to see if it is lit up. Twist volume knob to p ower off the Sound Rocker, then proceed to the connection method shown below for your audio/video device.

3Connect the 12-volt AC power adapter to the electrical outlet and then to the power AC port on the control panel.

CONNECTION METHODS

Video Game Console Connection

XBOX 360TM , PLAYSTATION 2TM PLAYSTATION 3TM , GAMECUBETM and others

There are four types of audio/video cables that come with video game consoles:

1. Standard AV/RCA Cable	2. S-Video AV/RCA Cable
(red, white–audio; yellow–video)	(red, white–audio; yellow, black–S-video)

3. High Definition AV/RCA Cable	4. Coaxial Connection
( red, white–audio; yellow, blue, red, green–video )	(single black cable)
	If you have this cable, you need to purchase the RCA
	audio cable from the console manufacturer. Or, you can
	connect the Pyramat through an intermediary audio
	source such as a TV, DVD, VCR, etc. (see below).

3