Premium 200Mbps Powerline AC | - | User’s Manual | |
|
|
|
|
A confirmation box appears if the password is entered correctly. If a device is not found, a message appears, providing suggestions to solve the common problems. This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by entering the device password of the device. A dialog box will appears. You can enter a device name and the password. (Also refers as DEK on the back Label, this DEK is generates via MAC address)
If the device is found and the password is entered correctly, a confirmation box appears. If a device is not found, a message appears, providing suggestions to solve the common problems.
Note:
The device must be in the powerline (plugged in), so that you can confirm the password and add the device to the network. If the device is not located, a warning message appears.
Scan
This button is used to perform an immediate search for HomePlugAV devices connected to the powerline network. By default, the utility automatically scans