Premium 200Mbps Powerline AC | - | User’s Manual | |
|
|
|
|
4.2 Using the Utility
Scenario:
Devices A and B are located in Network N. Device C (the joiner) that is located in another network attempts to join Network N. See
Do as follows to add Device C to Network N using the Utility:
1.Connect Device C to the network card of a PC.
2.Open the Utility. The Main tab page displays information about Device C after connection succeeds.
3.Click the Privacy tab page. Enter a name in the Private Network Name field.
4.Click Set Local Device Only. When the page shown as below displayed, the setting success. Now Device C has been removed from its logical network.
5.Press the pushbutton on Device A or B for less than 3 seconds, making it the „adder‟.
6.Within 2 minutes, press the pushbutton on Device C (the „joiner‟) for less than 3 seconds.
7.Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1 second intervals until the process succeeds or fails. It will illuminate steadily on success. If an error occurs, the Power indicator on Device A (or Device B) and Device C will flash unevenly for 2 minutes.