Rosewill RPLC-200P Forming a Powerline Network, Using the Security Pushbutton, Using the Utility

Page 19

Premium 200Mbps Powerline AC Pass-Through AV+ Adapter

- RPLC-200PKIT-

User’s Manual

 

 

 

 

Chapter 3 Forming a Powerline Network

This chapter describes how to form a HomePlug AV logical network (AVLN) using the Security pushbutton and using the Utility. Operation progress and outcome can be monitored by observing the behavior of the power LED.

3.1 Using the Security Pushbutton

Scenario:

Devices A and B with different NMK (Network Membership Key used to authenticate/access) values are connected to the same powerline. Users want to use them to form a logical network.

Forming a HomePlug AV logical network

Please follow below steps to form a logical network using the Security button:

1.Press the Security button on Device A for less than 3 seconds.

2.Press the Security button on Device B for less than 3 seconds. The button on B must be pressed within 2 minutes

3.Wait for connection to complete.

The Power indicator on both devices will flash evenly at 1 second interval until the operation succeeds or fails. The Power indicator will illuminate steadily on successful completion. If an error occurs, the Power indicator on both devices will flash unevenly for 2 minutes.

3.2 Using the Utility

Scenario:

-19-

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RPLC-200P Contents Package Contents Expanding your Network with RPLC-200P Key Features Plug and Play with Quick and Easy Installation Introduction to Hardware Enjoy Stable HD Videos and Gaming  Green Feature for Power saving mode Extra Power Outlet for more Convenience ApplicationSystem Requirement 1 LED Hardware Diagram of RPLC-200PColor Behavior Description Reset/Security Powerline Adapter’s Button and ConnectorIntroduction to Utility Utility InstallationRPLC-200PKIT RPLC-200PKIT Main Tab Utility IntroductionDevice Name PasswordMAC Address Scan AddSet Local Device Only Privacy Tab Set All Devices Diagnostics TabRPLC-200PKIT About Tab Scenario Forming a Powerline NetworkUsing the Security Pushbutton Using the UtilitySearch for Local device on your computer Setting the network name for your PLCNetwork name setting success Joining a network Joining a NetworkUsing the Utility Appendix a Improving the Transmission Quality Appendix B Specifications Contents DimensionsWeight TemperatureCCo Appendix C Acronyms and AbbreviationsAppendix D RPLC-200P QoS Support Default CAPCopyright & Trademarks Federal Communication Commission FCC Interference Statement
Top Page Image Contents