CONTENTS |
|
Section | Page |
IMPORTANT SAFEGUARDS AND WARNINGS | 2 |
Regulatory Notices | 2 |
DESCRIPTION | 3 |
Models | 3 |
INSTALLATION - CM6700 MODE | 4 |
INSTALLATION - DIRECT MODE | 6 |
SWITCH SETTINGS | 8 |
PROGRAMMING AND OPERATION | 9 |
Scanning Functions | 12 |
Programming Limit Stops | 12 |
Zones | 13 |
SPECIFICATIONS | 14 |
INDEX | 15 |
WARRANTY AND RETURN INFORMATION | 16 |
IMPORTANT SAFEGUARDS AND WARNINGS |
|
Prior to installation and use of this product, the following WARNINGS should be observed. |
|
1.Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2.This unit is designed for indoor use only, and it must not be installed where exposed to rain and moisture.
3.Only use replacement parts recommended by Pelco.
4.After replacement/repair of this unitÕs electrical components, conduct a resistance measurement be- tween line and exposed parts to verify the exposed parts have not been connected to line circuitry.
Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
Regulatory Notices
NOTE: This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gen- erates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to cor- rect the interference at his own expense.
[ 2 ] Pelco Manual