Important Safeguards and Warnings

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Installation should be done only by qualified service personnel and conform to all local codes.

6.Use only installation methods and materials capable of supporting four times the maximum specified load.

7.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8.Only use attachments/accessories specified by Pelco.

9.Use only with the cart, stand, tripod, bracket, or table specified by Pelco, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

10.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus does not operate normally, or has been dropped.

11.Only use parts recommended by Pelco.

12.Use stainless steel hardware to fasten the enclosure to outdoor surfaces.

13.AN ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building (permanent 240 VAC product only).

2	C561M-F (8/06)