StarTech.com ST121SHD50 manual LED Indicator, Status Transmitter

Page 6

LED Indicator

Status

Transmitter

DVI EDID content configured

*Emit blue with green flashing twice

HDMI EDID content configured

*Emit blue with green flashing three times

HDCP syncing

**Purple

Status

Receiver

Video Linking

***Steady Blue

Video unlinking

Steady Red

*It is suggested replacing cables with better quality ones if the LED emits blue without video displaying.

**The emitting period of purple LED depends on connected device.

***The LED emits steady blue indicating that the video signal is detected by Receiver.

Instruction Manual

3

Image 6
Contents Hdmi over Cat 5e/6 Extender 50m FCC Compliance Statement Table of Contents Rear View Product DiagramTop View Front ViewPackaging Contents IntroductionSystem Requirements LED Indicator Status TransmitterInstallation Hardware InstallationPreparing Your Site Video Adjustment Receiver Unit Only OperationEdid Configuration Auto Edid ConfigurationManual Edid Configuration Edid Copy / Edid Ghost Edid Factory Default Setting DDC Pass ModeSpecifications Technical Support Warranty Information Limitation of Liability