Axis Communications AXIS 207MW, AXIS 207W Connection diagram, LED indicators, Color Indication

Page 6 AXIS 207/207W/207MW Installation Guide

Connection diagram

							Fuse:
							AXIS 207: 500mA
							AXIS 207W/MW: 1A
			Fuse
3.3V	Linear				+o2
	Power
	Supply				Power - see table above.
		z			o1
					o2	e.g. pushbutton		Relay
				GND
					o1
						z
					o3	z
									o
											o
					o4				o	Device
										o o

z

IMPORTANT!

This diagram applies to the AXIS

Camera 207W and AXIS 207MW. The AXIS 207 has a different pinout and power - see the table above.

LED indicators

LED	Color	Indication
Wireless	Unlit	Wired mode.
	Green	Steady for connection to a wireless network. Flashes for network activity.
	Red	Steady for no wireless network connection. Flashes when scanning for wireless
		networks.
Network	Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.
	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.
	Unlit	No wired network connection, or AXIS 207MW/AXIS 207W in wireless mode.
Status	Green	Steady green for normal operation.
		Note: The Status LED can be configured to be unlit during normal operation, or to
		flash only when the camera is accessed. To configure, go to Setup > System
		Options > LED settings. See the online help files for more information.
	Amber	Steady during startup, during reset to factory default or when restoring settings.
	Red	Slow flash for failed upgrade.
Power	Green	Normal operation.
	Amber	Flashes green/amber during firmware upgrade.