SoundCraft CPS2000 technical manual Technical Specification, Rated Input Power Max

Page 18

Technical Specification

MAINS INPUT VOLTAGE RANGE:

230/200/115/100 V AC +10% / -15% @ 50/60Hz

RATED INPUT POWER (Max):

980 WATTS

MAINS FUSE RATING:

Use T10AL/250V (slow-blow).

OUTPUTS

DC. VOLTAGE RAIL

MAX. OUTPUT CURRENT

+17V

16.00 AMPS

-17V

16.00 AMPS

+48V

0.30 AMPS

+8V

1.25 AMPS

All voltage and current measurements are to be taken at the console-end of the power supply cable.

OPERATING TEMPERATURE RANGE (Ambient):

-10 TO +40°C.

HUMIDITY:

Similar unit tested at 0-90% RH non-condensing +/-5% Relative Humidity at 40 °C for 16 hours. Load switched between 20% and 100% at regular 30 minute intervals.

OVERALL DIMENSIONS:

HEIGHT:

 

177.00mm. (4U)

WIDTH:

Chassis

440.00mm.

 

Front panel

482.60mm.

DEPTH: (excl. handles)

436.00mm.

WEIGHT:

(Excl. packing): 30Kg

14

Technical Specification

Image 18
Contents Soundcraft CPS2000 EN6 3JN Contents Page Introduction Important Safety Instructions Introduction Mains Voltage SelectionMains Voltage Selector Positions Operating Voltage Range Warranty Recommendations for Installation of the CPS Recommendations for Installation General PSU Linking To ConsoleDimensions Installation Technical Specification Technical Specification Rated Input Power MaxOperating Temperature Range Ambient Circuit Description Circuit Description +/- 17V RAILS. SC3804+17V Supply. LH PCB Mains Voltage Meter Mutual Shutdown SystemOvercurrent Protection Temperature Protection System Undervoltage warning-17V Supply. RH PCB +48V Supply +8V SupplyMains Voltage Select PCB. SC3817 Fan Control PCB. SC4032 Faultfinding Notes +/- 17V RailsFuse Replacement This is DangerousCircuit Description Parts List Spare Parts Main Assemblies CPS2000 RH Module Assy Pcbs CAP Elec Vert 47UF 25V TPD SKP DZ7 RES 4W 470R VTM REG1 Miscellaneous Hardware Fan Control CPS2000 Fan Control & PCB SC4032 Technical DescriptionCPS2000 Fan Controller Circuit Diagram Fan Control Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings Technical Drawings