Playing Discs
Angle
Some discs offer different camera angles for specific scenes. To change the camera angle during playback:
1.Press ANGLE button on the remote control.
2.Press ANGLE button repeatedly to select the angle or enter an angle number using the numeric buttons.
If the disc was recorded using a single camera angle, this function is not available. There are very few discs offering more than one angle.
TT Time/CH Time
To directly access a location on the disc which does not correspond to the start of a title or a chapter:
1.Press SKIP button on the remote control twice.
2.Enter a time with the numeric buttons (format h:mm:ss).
Repeat
To select a playback mode while the disc is playing:
Press REPEAT button on the remote control repeatedly to select a repeat playback mode.
Display Info
Press the INFO button repeatedly during playback to show:
DVD: Title elapsed time, Title remaining time, Chapter elapsed time, Chapter remaining time, Display Off.
VCD, SVCD and audio CD: Single elapsed time, Single remaining time, Total elapsed time, Total remaining time, Display Off.
Note: A title or chapter can also be accessed by entering the
number in the on-screen display.
DVD Menu System
The DVD player menu system lets you set up features for your DVD player. There is a different menu system that controls TV features (see page 7). The DVD setup menu is accessed with the GUIDE button.
Note: Remember to use the DVD arrow buttons when accessing the
DVD player's menu system.
Playing Discs