Playing Discs

DVD Menu Navigation

1.Make sure the remote is in the DVD mode by pressing DVD button.

2.Press GUIDE. The General Setup Page menu is displayed.

3.Use the and buttons to display the different setup menus.

4.Use the and buttons to highlight a menu or option item. Use button to access the submenu and the and buttons to highlight your selection. (Use button to go back the menu).

5.Press the OK button to confirm your selection.

6.Press GUIDE to exit the DVD menu system.

Setup Menus

These menus are used to set up TV screen format for DVD viewing and other DVD functions.

General Setup Page

TV Display

TV Display is used only when the TV/DVD is connected to another TV. Choose one of the following options:

Normal/PS (Pan Scan): Select this option when the TV/DVD is connected to a standard 4:3 aspect ratio TV. A 16:9 wide screen picture is shown with some of picture partly cut off.

Normal /LB (Letter Box): Select this option when the TV/DVD is connected to a standard 4:3 aspect ratio TV. A full 16:9 wide screen picture is shown with black bars on the top and bottom.

Wide: Select this option when the TV/DVD is connected to a wide screen TV.

Angle Mark

The ANGLE MARK option is used when DVD discs contain scenes which have been shot simultaneously from a number of different camera angles.

Note: Currently, very few discs have this feature.

Use the ANGLE button on the remote control to access the Angle Mark.

ON: Select if the DVD disc contains camera angles. An angle symbol appears on the screen.

OFF: Select if the DVD disc does not contain angles.

OSD Lang

The OSD Lang controls the language used to display text in the DVD system menus. The default setting is English. Language options available are English, French, Italian, Portuguese, Spanish and Russian.

Playing Discs