Using TV Menus
TUNING |
|
CHANNEL | 8 |
DELETE CH | NO |
SOURCE | AIR |
LABEL | AAAAA |
AUTO SEARCH |
|
|
|
LABEL
The TUNING Menu
The TUNING menu is used to adjust the signal source, channel setup and reception of the TV.
CHANNEL | Use the VOL/ buttons on the remote |
| control (or the VOL/ buttons on the |
| front of the TV) to scroll through the channels |
| available. You can enter the channel number |
| directly using the number buttons. |
DELETE CH | Select YES to remove the channel. |
| Select NO to enter to the channel. |
SOURCE | Selects AIR or CABLE. Select AIR to receive a |
| broadcast signal. Select CABLE to receive a |
| CATV signal. |
To add a channel description:
1.Open the OSD and select the TUNING menu.
2.Enter the channel you want to add a description for in the CHANNEL option.
3.Select the LABEL option.
4.Press the VOL button, then enter the first character of your label.You can press the
number button repeatedly in a interval of less than one second to select the character you want.For example,if you want to input 'L',you can press '5' four times rapidly.When you stop pressing,the cursor will move to the next character after one second.
5.Enter the rest of characters. After you enter the fifth character, you description is saved. You must enter the five characters, or the label will not be saved.
6.If you want to erase a description, repeat this task and press VOL button to delete the characters.
AUTO SEARCH
Starts channel search and stores the channels automatically. Use the VOL/ buttons on the remote control to begin the auto search. If you wish to stop the search before completed, press MENU.
Using TV Menus