HOW TO OPERATE
ENERGY SAVER
During normal operation, the thermostat automatically controls cooling and the fan runs continu- ously. When the ENERGY SAVER is selected, the thermostat automatically controls cooling and the fan automatically stops when the compressor is not operating. (Fan will stop 30 seconds after the compressor stops. Even after the fan stops, the fan will rotate for 2 minutes, every maximum 20 minutes, to detect room temperature.)
F
hr
COOL / FAN TEMP
SELECTOR | TIMER | ENERGY | POWER | |
ON/OFF | SAVER | |||
| ON/OFF |
ENERGY SAVER pad
ENERGY SAVER indicator
During cooling operation
1 | Touch ENERGY SAVER pad. |
• ENERGY SAVER indicator will light. | |
2 | To cancel, touch ENERGY SAVER |
pad again. |
• ENERGY SAVER indicator will go off.
NOTE: ENERGY SAVER cannot be set during fan only (HIGH FAN, MED FAN, LOW FAN) operation.
TO CHANGE AIR FLOW DIRECTION
The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient cooling of the room.
Horizontal louvers | Vertical louvers |
Lever
Adjust UP/DOWN air flow | Adjust LEFT/RIGHT air flow |
13