Sharp AF-S80CX, AF-R80CX, AF-R85CX operation manual On Timer Operation, To Cancel the Timer Setting

Page 14

HOW TO OPERATE

ON TIMER OPERATION

This unit has a built-in timer that can be programmed to start the unit up to 12 hours in advance. You can set the timer to start in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance of the start time, or in 1 hour increments from 10 to 12 hours in advance of the start time.

The unit will start automatically according to your setting.

SELECTOR indicator

F

hr

COOL / FAN TEMP

SELECTOR

TIMER

ENERGY

POWER

ON/OFF

SAVER

 

ON/OFF

TIMER ON/OFF pad

TIMER indicator

(If you wish to start the operation 6 hours and 30 minutes later, set the delay time as shown above.)

When the unit is not operating

1Touch the TIMER ON/OFF pad to set the delayed start time.

The time setting will change as you touch the pad. The display will change as follows;

Preset(0.5h)

Previous setting 0.5h 1.0h 1.5h 10h

CL(cancel) 12h 11h

The timer will be set, 5 seconds after the TIMER ON/OFF pad is touched for the last time.

SELECTOR indicator and TIMER indicator will light.

The time display will count down the remain- ing time.

The unit will start when the set time expires. The temperature setting will be displayed.

TO CANCEL THE TIMER SETTING

Touch the TIMER ON/OFF pad again after the timer is set, or press the TIMER ON/OFF pad until CL(cancel) appears on the display.

NOTES FOR TIMER SETTING AND OPERATION:

After setting the TIMER, change the temperature and fan speed settings as shown on pages 11 and 12. When the temperature is set in the timer mode, the temperature will show in the display for 5 seconds and then return to the time display.

The last setting used will be memorized and will appear on the display the next time you operate the unit with the TIMER function.

If a power failure occurs while the ON or OFF TIMER is set, the TIMER memory will be cancelled and will not resume even after power is reinstated. The unit will not automatically start.

OFF TIMER OPERATION can also be set with the REMOTE CONTROL.

14

Image 14
Contents AF-S80CX AF-R80CX AF-R85CX Accessories Additional Customer Information For Your ProtectionConsumer Limited Warranty Consumer Limited WarrantyLocation Installation InstructionsCheck Window Area Accessories Suggested ToolsInstallation Secure the top angle of the unit Precautions Grounding InstructionsPrecautions Energy Efficiency TipsAF-S80CX, AF-R80CX HOW to OperateParts Names AF-R85CXCooling Operation To Change Temperature SettingTouch Power ON/OFF pad ON/OFF pad againTo Change FAN Speed and Operation Mode LOW FANDuring cooling operation Touch Energy Saver pad Energy SaverTo Change AIR Flow Direction Pad againOn Timer Operation To Cancel the Timer SettingTouch the Timer ON/OFF pad to set the delayed stop time OFF Timer OperationWhen the unit is operating Using the Remote Control Installing BatteriesTransmitter Remove the Filter Cleaning and MaintenanceClean the Filter AIR Conditioner does not Operate AT ALL Timer does not Work ProperlyIf the Unit Fails to Receive the Remote Control Signal AIR Conditioner does not Properly CoolSharp Electronics Corporation